Vipower SmartDup VP-8220 Manual de usuario Pagina 1

We are your DataBridgeTMhttp://www.vipower.comInstallation GuideModel: VP-8220Stand-Alone IDE CD Duplicator

8 SmartDup IDE CD Duplicator User’s GuideInstalling Drive, Cover and Rubber StandsTop CoverBottomCoverDriveMountingScrews (x4)CD-ROMDriveRubberStands

SmartDup IDE CD Duplicator User’s Guide 99. Place the CD-ROM drive box on top of the CD-R or CD-RW drive box.10. Slide the holding brackets (centering

10 SmartDup IDE CD Duplicator User’s GuideUSB-to-PC InterfaceConnector (Option)SmartDup Cable ConnectionsDC IN AC AdapterConnectorTo AC Power OutletTo

SmartDup IDE CD Duplicator User’s Guide 113-1 Stand-Alone OperationStand-alone operation of your SmartDup CD Duplicator is designed for easyduplicatio

12 SmartDup IDE CD Duplicator User’s Guide3-1.3 Duplicator FunctionsThe function of the SmartDup is determined by the setting of DIP switches onthe

SmartDup IDE CD Duplicator User’s Guide 13(2) 1X Copy (H2/L2)Sets the CD-R/RW to “1X Copy” mode, which will always record at the minimumwriting spee

14 SmartDup IDE CD Duplicator User’s Guide1. Set the Power Switch to CD Duplicator ON position.The LEDs will display the firmware version number, for

4. The LED display will show and beep a final countdown, then display themaximum writing speed, for example:5. The LED display will then show the test

16 SmartDup IDE CD Duplicator User’s Guide5. The LED display will then show the minimum writing time remaining.6. When the testing is complete, beeps

SmartDup IDE CD Duplicator User’s Guide 17(7) High Speed Auto Mode (H7/L7)Sets the SmartDup to “High Speed Auto” mode, which will auto-detect and era

1-1 Introduction ... 11-1.1 SmartDup Features ...

18 SmartDup IDE CD Duplicator User’s Guide3-2 PC Interface OperationBesides operating in stand-alone mode, the SmartDup is designed to interface witha

SmartDup IDE CD Duplicator User’s Guide 194. Depending on the operating system and interface used, the system will detect anew device and either find

20 SmartDup IDE CD Duplicator User’s GuideAPPENDIX AA-1 Upgrading the SmartDup Firmware (H1/L1)Use this function only to upgrade the SmartDup residen

SmartDup IDE CD Duplicator User’s Guide 219. When the self-test is completed, a “rd” (ready) is displayed, followed by twobeeps, “00” and then the spe

Printed on recycled paper.

SmartDup IDE CD Duplicator User’s Guide 11-1 IntroductionCongratulations on your purchase of the SmartDup stand-alone IDE CDduplicator. As an easy-to-

2 SmartDup IDE CD Duplicator User’s Guide• Formats supported: Audio CD (CD-DA), CD-ROM, CD-XA (Photo &Video CD), CD-Digital, CD-Bridge, CD-Extra,

SmartDup IDE CD Duplicator User’s Guide 31-1.4 Unpacking Your SmartDupVerify that the following items are included in the carton. If any parts are dam

4 SmartDup IDE CD Duplicator User’s Guide1-1.5 CD-ROM/CD-RW CompatibilityThe CD-ROM and CD-RW drives for your SmartDup must be provided by theuser. To

SmartDup IDE CD Duplicator User’s Guide 51-1.6 CD-RW Data Transfer Rate CompatibilityWhen using a PC interface cable, make sure your CD-R/RW is withi

6 SmartDup IDE CD Duplicator User’s Guide2-1 InstallationThe following sections will guide you through the installation and setup of yourSmartDup CD d

SmartDup IDE CD Duplicator User’s Guide 72-1.2 Install CD-ROM/CD-RW Drive in CD-ROM Box1. Attach the two connectors from the end-panel assembly to the